A Full Edge Epoxy RFID Key tag is a tiny microchip that can store and transmit small amounts of data wirelessly using radio frequency signals in the RFID key tag, which is a process of sealing the edge of a PVC material to prevent fraying and increase durability. It can be done using various techniques such as heat-sealing or applying a clear adhesive. Dripping glue refers on the PVC key tag to the act of allowing glue to slowly drip out of the applicator tip, often used in crafting or DIY projects to control the amount of adhesive being applied. RFID (Radio-Frequency Identification) key tags are small electronic devices that contain a unique identifier and can transmit data wirelessly using radio waves.
|
|
ABS, PVC+epoxy, or 3M sticker |
|
|
25MM/28MM/30 dia, /Custom |
|
|
3.5MM/Custom |
|
|
|
|
|
Such as AT5577, TK4100, NXP Mifre 1K, 4K, Ultralight, Desfire 2k, 4k, 8k, Ntag 213, Ntag 216, FM1108, FMS70 and so on. |
|
|
Sample Card/100pcs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Normally 5-7days after approval the artwork |
|
|
200/250pcs per box; 2500/3000pcs per carton |
A: As usual the lead time is 9-12 days for 5000pcs of epoxy cards. If over 5000pcs, it takes around 12-15 days.
A: We have four glue dispenser machines, and the daily capacity is 100,000pcs of epoxy key cards, and we also have 500 sets of full edge epoxy tool. It is the biggest capacity for epoxy cards in the current manufacturer.
Clibeanna Te: